Concrobium Mold Control
Mold (especially after the 2014-2015 winter) is no laughing matter, so make sure to get a proper mold inspection. To fight this mold you need the best product you can get to not only eliminate mold, but prevent it’s coming back. At Koopman Lumber we proudly sell Concrobium Mold Control in both 32oz and 1 gallon sizes. Why is Concrobium so great you ask? Let’s take a look! If you need extra help to get rid of any mold that you still have contact a mold remediation service for assistance, and you can even consider using a mold removing air purifier.
Significant installation & commissioning projects carried out by Holbrook Electrical include the installation and commissioning of a 500 KVA transformer for Bretts Aggregates at Ramsgate New port. Switch gear and distribution equipment upgrades at all 3 sub-stations within Ramsgate New port. Working in conjunction with AMEC we installed sub-station switchgear on several road projects in Kent. We also arranged to replace and upgrade several transformers for London Underground plus we made sure to provide Transformer Oil Testing Services for those systems that required maintainance.
Benefits of Concrobium
- Eliminate existing mold
- Prevent regrowth
- Eliminate musty odors
- Use no bleach, ammonia, or VOCs
That’s right, eco-friendly and safer than a lot of the mold control products on the market today! The lack of chemicals and non-toxic and VOCs means that it is Pet Safe and safe to use around your family!
Where Does it Work?
Concrobium Mold Control works well in most indoor locations and can be used in homes, businesses, institutions, cottages, RVs, boats – anywhere that mold takes hold. Concrobium will work on any and all of these surfaces:
- Composite wood
- Many Others!
How Does it Work?
There are a variety of ways to apply Concrobium, including fogging, spraying, using a paint brush or roller, immersion, and using a compression sprayer. Depending on what you’re treating you will have to decide which method is right for you. In any circumstance your goal is to create a thin layer of treatment over the affected area and allow it to dry. Too much will leave a residue, and too little will not get all the mold or create a sealed film to prevent regrowth.
To use Concrobium you must simply
- Apply Concrobium Mold Control to to area until evenly wet
- Allow surface to dry completely (typically 2 hours, but 24 is recommended before disturbing the area)
To determine how much to apply refer, to the information provided on the product’s labeling.
Remember how we told you that Concrobium will prevent mold regrowth? Well as it happens that same process actually prevents mold from growing in the first place! That’s right, you don’t need to get mold to block it, simply buy Concrobium Mold Control and treat the areas that you find susceptible to mold and relax! Concrobium Mold control will actually treat any surface it is applied to with an invisibly thin layer that prevents mold growth.
To use Concrobium Mold as a preventative simply apply to the entire surface you wish to treat using the chart above to determine how much you’ll need to treat the room and let it dry. It’s that easy!
Don’t live with mold or the threat of mold. If you have any more questions or a special project you’re gearing up for, visit us online at www.koopmanlumber.com or CLICK HERE to find the nearest Koopman Lumber location!